搜索:
- [新聞]-->立式液壓打包機常見故障分析
- [新聞]-->臥式液壓打包機使用步驟
- [新聞]-->廢棉處理機的知識
- [產品]-->LHFU017型多筒式除塵機組
- [產品]-->LHFA100型雙進風凝棉器
- [產品]-->LHFU201B型粗紗頭開松機
產品推薦
產品分類
聯系方式
- 聯系人:任文華
- 郵 箱:rwh_2007@126.com
- 地 址:江陰市夏港街道聯村西小莊18號
- 手 機:139 6169 7526
- 電 話:
- 傳 真:0510-86033019
- 網 址:http://www.jylhfj.com
LHFU002型廢棉處理機
發布時間:2012-08-13
LHFU001型廢棉處理機
Model LHFU001 Cotton Waste Cleaner
一、產品用途:Application
主要用于棉紡廠回收下腳棉中的可紡纖維,如清鋼部、棉斬刀花、掃地花等各種廢棉的處理。
Applicable in cotton mills to recover spinnable fibres from such cottn waste as card sweeps,flat strips,sweepimgwaste,ect.
二、工作原理:Working principle
經預處理機處理后的有效纖維吸附到凝棉器塵籠表面,由撥棉打手剝下后落入棉箱,經鼻形打手開松除雜后進入喂給羅拉,再經給棉羅拉與給棉板之間的鉗口供齒輥梳理,纖維層得到較好的除雜,在風機作用下吸附在塵籠表面并去除短絨和細小雜質,由一對剝棉羅拉輸出,雜質由落雜區葉片閥經風管排出。
Useful fubres are suked to the condenser drum after precleaner,peedled off into the trunk by the strip-ing beater then to the feed roller after being loosened and re-moved of trashes by anors beater ,and at last to the cylinder for carding between the feed roller and feed table .After substantial trash-removal,the fibre is suctioned onto the drumsurface via a fan with further removal of short fibres and m-icrodust,and delivered by a pair of stripper rollers.And the trashes will be then exhausted out of the trashes will be then exhausted out of the air duct through the blade valve in the dustdopping zong.
三 主要技術參數:Technical data
項目Item
參數Data
備注Renarks
機幅(mm)Inner width
1060
處理量(kg/h)Output
120-160
全機功率(Kw)Installed power
11.81
外形尺寸(長*寬*高)(mm)
Overall sizes
3210*1610*3920